Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 27.06.2025 03:44

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

what exactly is a ‘surge’ protector?

This is where the MOV conducts again, and dissipated the energy.

What if Supergirl was a baby and not a teenager when she left Krypton? Who do you think will find her? What do you think things would be like?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

This device then solves the entire problem.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

I am upper middle class and study at the London School of economics and Finance (economics and Finance). I am 18 years old. What are my chances of becoming a billionaire?

It also is a device that limits the change in current flow.

This one hit behind the barn.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

If you cloned 12 Michael Jordan's and 12 LeBron James' and had Team Jordan vs. James, which team would win the most games?

Can the fuse protect the electronic devices from lightning instead of a surge protector.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Barnstars:

Brutal 100-degree temperatures will hit cities from Boston to Washington - The Washington Post

At least they know the answer if they wanted it.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Why are American women so ugly nowadays?

But… the neutral is now “floating” because of the 1 ohm resistance.

The MOV will conduct when the voltage exceeds 50% of line voltage.

2024–10–10[John johnson John Johnson ]

Why is Taylor Swift re-recording her albums?

Upvotes:

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Why are people nowadays so into anal sex?

What does a fuse do?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

There are three different concepts here that are getting confused.

Ask Ethan: What are the "first stars" in the Universe? - Big Think

I post the exact comment here.

In schematic diagrams this is the symbol for a fuse:

A fuse is a non-resetable over current circuit protector.

What is a narcissist grandmother like, with her grandchild?

The bolt then partially travels down the line to your home.

2024–10–16 [ OO OLAOYE OYEBODE ]

There are two important concepts here.

Sonic Racing CrossWorlds Is a Kart Racing Spectacle That Celebrates Sega’s History - IGN

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

a photo is worth a thousand words.

But it can get overloaded, and no longer works.

Adam Silver Talks NBA Expansion - Blazer's Edge

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Now when you have a certain ac resistance, then a current flows in a loop.

Quo perferendis neque at temporibus pariatur quis.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

One is “what exactly is in a ‘surge protector’ ? ”

He then describes Rainy Season and Lightning.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

[old diagram got deleted by accident]

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

eight

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

He then asserts :

Edit 2024–10.

Here is a simplified AC power diagram.

One

He then describes the function of a fuse.

[image of Common-mode choke]

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

These devices are installed between the “hot” and “neutral” and protective ground.

nine

The third is lightning and “how it gets conducted into a home.”

so, what happens?

(Dc diagram shown, AC is similar).

The other is “what does a “fuse” do?”

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

but I think this circuit , shows a few more pieces.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

So, the voltage could go up to 500 volts, and the fuse will not open up.

For this case there are devices called Metal oxide varistors (MOV).

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

These are simplified answers to the original question, and does not change anything I wrote above.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

This is 'the assistant's answer'

2024–10–14 [Omar Gharbi Omar Gharbi ]

A circuit breaker is similar, but is resettable.

Because the load is inductive, the current lags the voltage.(by a bit).

It seems Mohan does not understand the difference between a comment and an Answer.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

This is where this question deviates from being a 'generic' question, and becomes more specific.

the problem then depends on "how fast does the fuse operate?".

First Sentence:

At one ohm, the resistor has a maximum of 1 watt power.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

What is lightning?

but this device (an Inductor) … impedes the rapid changes in the current.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

An AC voltage/ current source, and an ac inductive load.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].